How to Run AI Agents in Parallel: Patterns, Setup, Review, and Cost

Learn how to run AI agents in parallel without merge conflicts or wasted tokens, then give each one an always-on instance from $3.99 a month. Start today.

Published on

•

Do not index
To run AI agents in parallel, split one job into independent slices, give each agent its own isolated workspace, launch them at the same time, then collect and review every result before anything is merged. We recommend Agent 37 as the place to run them: each OpenClaw or Hermes agent gets its own always-on, isolated container from $3.99 per month, and your API keys go straight to Anthropic or OpenAI. Agent 37 is not an orchestration framework and not a model; it is the always-on computer each parallel agent runs on, with a task board for assigning work and reviewing what comes back.
Key takeaways
  • Parallel is not the same as multi-agent: parallel agents work on independent slices of one job at the same time, while a multi-agent system can also mean agents that hand work to each other in sequence.
  • Isolation is non-negotiable: one git worktree or directory per agent is what stops two agents from editing the same file at the same moment.
  • Parallelism multiplies tokens: Anthropic reported that its multi-agent research system used about 15 times the tokens of a normal chat, so parallelize only when wall-clock time matters more than token spend.
  • Every major coding agent can do it: Claude Code uses subagents or several sessions in worktrees; Cline and OpenCode get there with one editor window or terminal session per worktree.
  • Agent 37 hosts each agent in its own isolated container from $3.99 per month, with a browser terminal, file browser, live Linux desktop, and a task board for reviewing outputs.
A four-stage isometric pipeline shows a job being sliced, worked in isolated rooms, collected, and reviewed before merging.

What does it mean to run AI agents in parallel?

Running AI agents in parallel means launching several agents at the same time, each working on an independent piece of one larger job, then combining their outputs at the end. It differs from a general multi-agent system, where agents may hand work to each other in sequence or negotiate. Parallelism is about concurrency and independence, not conversation between agents.
The lifecycle has four stages, and skipping any of them is where most setups fail. First you decompose the job into slices that do not depend on each other. Second, each agent runs in its own workspace. Third, you collect every output in one place. Fourth, a human or a single review agent synthesizes, tests, and merges.
A multi-agent system is a broader term. A pipeline where a planner agent writes a spec, a coder agent implements it, and a reviewer agent checks it is multi-agent but strictly sequential, because each step waits on the last. The parallel question is narrower: which parts of the work can start right now without waiting for anything else?
The discipline matters because agent projects are easy to over-engineer. Gartner predicts that over 40% of agentic AI projects will be canceled by the end of 2027, citing rising costs and unclear business value. Parallelism is a tool for cutting elapsed time, not a goal in itself.

How should you split a task so agents can work independently?

Split by output, not by step. Each slice should touch its own files or produce its own artifact, need no result from another slice to start, and be verifiable on its own with a test or a checklist. Write the shared context once and hand every agent the same copy.
Take a feature that needs a database migration, a new API endpoint, a frontend form, and integration tests. A bad split assigns one agent to "backend" and another to "frontend" and lets them both guess the API contract. A good split writes the contract first, in a short document, then hands out the migration, the endpoint, the form, and the tests as four slices that each reference that contract.
Three decomposition rules hold up in practice. Keep each slice small enough that a single agent can finish it in one session without losing the thread. Give each slice an explicit done condition, such as "tests in tests/billing pass". Name the files each agent may touch, so overlap is a visible violation rather than an accident.

Which parallel patterns actually work?

Four patterns cover almost every real use. Fan-out and fan-in splits one job into slices and merges the results. Specialist parallelism assigns different roles to different agents. Competing solutions gives several agents the same task and keeps the best answer. Parallel coding agents is fan-out applied to a repository, with one worktree and branch per agent.
Fan-out and fan-in is the default. A research task fans out to one agent per source, each writes a summary to its own file, and a final step reads every summary and produces one report. The fan-in step is where quality is decided, so budget time for it.
Specialist parallelism works when the slices need different skills or tools. One agent with a browser researches competitors, another with repo access drafts code, a third with a Gmail integration drafts outreach. Each gets only the permissions its job needs, which also limits damage if one goes wrong.
Competing solutions is the expensive pattern. Three agents attempt the same tricky bug fix, you diff the three branches, and you keep one. You pay for three runs and use one, so reserve it for problems where a wrong first attempt would cost more than two discarded ones.

Can several agents share one repo without clobbering each other?

Yes, if every agent gets its own git worktree, its own branch, and scoped permissions. A worktree is a separate checkout of the same repository in its own directory, so two agents editing the same file name never touch the same bytes.
The setup is copy-pasteable. From the root of your repository, create one worktree and branch per agent:
git worktree add ../app-auth -b agent/auth
git worktree add ../app-billing -b agent/billing
git worktree add ../app-tests -b agent/tests
Then open one terminal pane per worktree. A tmux layout keeps everything on one screen:
tmux new -s agents
tmux split-window -h
tmux split-window -v
In each pane, change into the matching directory and start your agent, for example cd ../app-auth && claude. Give each agent a prompt that names its scope and its done condition: "You are working only in src/auth and tests/auth on branch agent/auth. Implement password reset per docs/contract.md. Do not edit files outside those folders. Finish by running the auth test suite and reporting the result." The git worktree documentation covers listing, pruning, and removing worktrees once the branches are merged.
Scope permissions as tightly as the tool allows. In Claude Code that means restricting which tools a subagent can call; in a hosted setup it means each agent runs in its own container with its own credentials, so a billing agent cannot read the auth agent's environment variables.
Four pedestals display icons for fan-out, specialist, competing solutions, and worktree patterns.

How do you run Claude Code agents in parallel, and what do Cline and OpenCode offer instead?

Claude Code offers two routes: subagents inside one session, each with its own context window and tool restrictions, or several full sessions, each started in its own worktree. Cline runs parallel work as one VS Code window per worktree. OpenCode runs one terminal session per worktree and supports subagents in its config.
Subagents are the lighter option. You define them as markdown files in the .claude/agents folder with a name, a system prompt, and the tools they may use, then ask the main session to delegate to them. Because each subagent has a separate context, the parent session stays clean, which is the main reason to use them for research and review tasks. The Claude Code docs page on running agents in parallel describes the worktree workflow for heavier coding work. Claude Code is included with Claude Pro at $20 per month and with Max plans, or billed per token through the API; confirm current terms on Anthropic's pricing page, and note that parallel sessions on one subscription share the same rate limits.
Cline is an open-source VS Code extension with bring-your-own-key billing. It has no built-in orchestration, so Cline parallel agents in practice means opening one VS Code window per worktree and running a separate Cline task in each. OpenCode is an open-source terminal agent; its config can define primary agents and subagents, and the tmux layout above works for it unchanged.
Custom orchestration with LangGraph or CrewAI is the right call when the work is a non-coding pipeline, such as data enrichment or report generation, and you want fan-out and fan-in expressed as code. Both are open-source Python frameworks. The trade-off is that you write, test, and host the orchestrator yourself.
Option
Parallel mechanism
Pricing or format
Standout limit
Agent 37
One isolated, always-on instance per agent, plus a task board
From $3.99 per month per managed OpenClaw or Hermes instance, bring your own API keys
Hosts agents; it does not orchestrate them for you
Claude Code
Subagents in one session, or multiple sessions in worktrees
Included with Claude Pro at $20 per month, or API tokens; confirm on Anthropic's site
Sessions on one plan share rate limits
Cline
One VS Code window per worktree
Open-source extension, bring your own key
No built-in orchestration
OpenCode
One terminal session per worktree, subagents in config
Open-source terminal agent, bring your own key
You manage the terminal layout
LangGraph or CrewAI
Parallel nodes or async tasks written in Python
Open-source frameworks
You build and host the orchestrator

Where should parallel agents run so they keep working after you close your laptop?

On always-on machines that are isolated from each other. Running four agents on one laptop means four processes competing for memory and all stopping when the lid closes. Agent 37 gives each agent its own persistent, isolated container, keeps files and sessions between runs, and exposes a browser terminal, file browser, and live desktop for watching any agent mid-run.
This is the part the ranking guides skip. Parallel agents are only useful if they finish, and a terminal session on a laptop does not survive a reboot, a Wi-Fi drop, or a commute. Agent 37's always-on AI agent hosting runs OpenClaw, Hermes, or any Docker image on a persistent instance from $3.99 per month, with API keys going directly to Anthropic or OpenAI so the platform never touches them.
For coding agents specifically, Claude Code hosting on a persistent instance means the repo, caches, and sessions are still there when you come back, and Codex or Pi can be provisioned the same way through one API call. One instance per agent is the hosted version of one worktree per agent: the isolation is at the container level, so there is nothing to clobber. The Vision case study shows that pattern in production, with every coding session getting its own machine.
The cost comparison favors managed hosting. An always-on worker on the smallest sensible hyperscaler VM lands near $25 a month before storage, schedulers, and networking, and you still own the updates and security patches. Agent 37 applies runtime updates and security patches automatically, and the built-in task board lets you assign work to each agent, schedule recurring jobs, and review outputs in one place. The platform hit #1 Product of the Day on Product Hunt.

How do you review and merge the output of parallel agents?

Review each branch on its own before you look at any other. Run its tests in its own worktree, read the diff, and reject anything outside the agent's named scope. Then merge in dependency order, rebase the remaining branches after each merge, and resolve conflicts yourself or hand them to one agent with the conflict pasted into the prompt.
A practical checklist for each branch: does the diff stay inside the allowed folders, do the tests the agent claims to have run actually pass when you run them, and did the agent quietly change a shared file such as a config or a lockfile? Shared-file edits are the most common source of merge conflicts between parallel agents, because every agent thinks it is the only one touching them.
Duplicated work is the second thing to check. Two agents given overlapping scope will both write a helper with the same purpose and different names. Grep for new functions across all branches before merging, and fold duplicates into one.
Skepticism at review time is warranted. Stack Overflow's 2025 Developer Survey found that 84% of developers use or plan to use AI tools, while 46% distrust the accuracy of their output. Parallel runs produce more output per hour, so the review step has to scale with it, or you have simply moved the bottleneck.
A balance scale weighs a stopwatch against a tall stack of token coins, showing the speed versus cost tradeoff of parallel agents.

Is it cheaper to run agents in parallel or one after another?

Sequential is cheaper in tokens; parallel is cheaper in time. Every parallel agent re-reads the shared context, so four agents pay for the repo map and instructions four times. Competing-solutions runs multiply cost by the number of attempts. Compute is the smaller line: one always-on managed instance per agent starts at $3.99 per month on Agent 37.
Here is the token math with a worked example. Suppose a model is priced at $3 per million input tokens and $15 per million output tokens, which is Anthropic's published rate for Claude Sonnet at the time of writing; confirm current pricing on Anthropic's site. A job split across four agents, each loading 40,000 tokens of shared context, spends 160,000 context tokens where a single sequential agent would spend 40,000. The extra 120,000 input tokens cost $0.36. Output tokens are roughly the same either way, because the same code gets written.
That is cheap when the job is big. It stops being cheap in two cases. Competing solutions with three attempts triples both input and output, so a $4 task becomes a $12 task with two branches thrown away. And agents that chat with each other, re-plan, or re-read results multiply context again. Anthropic reported that its multi-agent research system used about 15 times the tokens of a normal chat, which is the honest upper bound to plan for.
The billing model changes the calculus. On a per-token API key you pay for every parallel run but never get throttled. On a subscription such as Claude Pro, parallel sessions draw down the same rate limit, so you may finish faster for the first hour and then wait. Bring-your-own-key hosting on Agent 37 keeps the metered model and the direct relationship with the provider.

When does parallelism stop paying off, and what breaks?

Parallelism stops helping when the slices depend on each other, when the job is small enough to finish in one session, or when the serial parts dominate. If a job is 60% serial, the best possible speedup from infinite agents is well under three times. The practical failure modes are merge conflicts, duplicated work, rate limits, and context contamination.
Tasks that are a bad fit include anything with a shared mutable state, such as a single config file every slice must edit; design decisions that have not been made yet; and work where step two cannot be described until step one is done. Refactors that rename a symbol used across the codebase are the classic trap, because every worktree touches the same lines.
Four failure modes show up repeatedly. Merge conflicts, fixed by tighter file scoping. Duplicated work, fixed by naming outputs up front. Rate limits, fixed by staggering launches or using separate API keys per agent. Context contamination, where one agent's half-finished output leaks into another's prompt through a shared file, fixed by writing to agent-specific directories until the fan-in step.
Observability is how you debug all four. Give each agent its own log, watch the live terminal rather than waiting for a final report, and keep the task board or tracker as the single record of who was assigned what. McKinsey's State of AI research finds most organizations are still experimenting with agents rather than scaling them, and visibility into what each agent actually did is a large part of that gap.

How did we compare these tools?

We compared the published documentation and pricing pages for Claude Code, Cline, OpenCode, LangGraph, and CrewAI, focusing on three things: what mechanism each one offers for parallel work, how it is billed, and what it leaves to the user. Agent 37 details come from its own product and solutions pages.

How do you get started with Agent 37?

Deploy one managed OpenClaw or Hermes instance in one click from $3.99 per month, add your Anthropic or OpenAI key, and assign the first slice of work from the task board. Add a second instance for the second agent, and you are running in parallel on isolated, always-on machines.

What do people also ask?

Can two AI agents work together?

Yes, in two ways. In a parallel setup they work on independent slices of one job without talking, and a fan-in step combines the results. In a coordinating setup, one agent can hand results to another through shared files, a message queue, or a framework such as LangGraph. Coordination costs more tokens and is harder to debug, so default to independence.

Is it possible to run AI agents locally?

Yes. Claude Code, Cline, and OpenCode all run on a laptop, and local models through Ollama remove the API cost entirely. The constraints are memory and uptime: each parallel agent is a separate process, local models are slower and weaker than hosted frontier models, and everything stops when the machine sleeps. Long or overnight runs belong on an always-on instance.

How can I run Claude Code agents in parallel?

Either define subagents in the .claude/agents folder and ask the main session to delegate to them, or create one git worktree per task with git worktree add, open one terminal pane per worktree, and start a separate claude session in each. Give every session a prompt that names its allowed folders, its branch, and its done condition, then review and merge each branch yourself.

Can AI do parallel processing?

At the agent level, yes: several agents can run concurrently on separate tasks because each one is just a separate process calling a model API. The model itself still handles each request one at a time per call, so the speedup comes from splitting work across independent agents, not from one agent thinking faster.

What tasks are a bad fit for parallel agents?

Anything where the slices depend on each other: codebase-wide renames, edits to one shared config file, design decisions that are still open, and jobs small enough to finish in a single session. If describing the second task requires the result of the first, run them in sequence. Parallelism also pays off less on subscription plans, where sessions share one rate limit.